Install and configure Microsoft Tunnel VPN solution for Microsoft Intune (2023)

  • Article
  • 20 minutes to read
  • Review and Configure prerequisites for Microsoft Tunnel.
  • Run the Microsoft Tunnel readiness tool to confirm your environment is ready to support use of the tunnel.

After your prerequisites are ready, return to this article to begin installation and configuration of the tunnel.

Create a Server configuration

Use of a Server configuration lets you create a configuration a single time and have that configuration used by multiple servers. The configuration includes IP address ranges, DNS servers, and split-tunneling rules. Later, you’ll assign a Server configuration to a Site, which automatically applies that configuration to each server that joins that Site.

To create a Server configuration

  1. Sign in to Microsoft Endpoint Manager admin center > Tenant administration > Microsoft Tunnel Gateway > select the Server configurations tab > Create new.

  2. On the Basics tab, enter a Name and Description (optional) and select Next.

  3. On the Settings tab, configure the following items:

    • IP address range: IP addresses within this range are leased to devices when they connect to Tunnel Gateway. The Tunnel Client IP address range specified must not conflict with an on-premises network range.

      • Consider using the Automatic Private IP Addressing (APIPA) range of 169.254.0.0/16, as this range avoids conflicts with other corporate networks.
      • If the client IP address range conflicts with the destination, it will loopback and fail to communicate with the corporate network.
      • You can select any client IP address range you want to use if it doesn't conflict with your corporate network IP address ranges.
    • Server port: Enter the port that the server listens to for connections.

    • DNS servers: These servers are used when a DNS request comes from a device that's connected to Tunnel Gateway.

    • DNS suffix search (optional): This domain is provided to clients as the default domain when they connect to Tunnel Gateway.

    • Disable UDP Connections (optional): When selected, clients only connect to the VPN server using TCP connections. Because the standalone tunnel client requires use of UDP, only select the checkbox to disable UDP connections after you’ve configured your devices to use Microsoft Defender for Endpoint as the tunnel client app.

  4. Also on the Settings tab, configure Split tunneling rules, which are optional.

    You can include or exclude addresses. Included addresses are routed to Tunnel Gateway. Excluded addresses aren’t routed to Tunnel Gateway. For example, you might configure an include rule for 255.255.0.0 or 192.168.0.0/16.

    Use the following options to include or exclude addresses:

    • IP ranges to include
    • IP ranges to exclude

Note

Do not use an IP range that specifies 0.0.0.0 in any of the include or exclude addresses, Tunnel Gateway cannot route traffic when this range is used.

  1. On the Review + create tab, review the configuration, and then select Create to save it.

Create a Site

Sites are logical groups of servers that host Microsoft Tunnel. You’ll assign a Server configuration to each Site you create. That configuration is applied to each server that joins the Site.

To create a Site configuration

  1. Sign in to Microsoft Endpoint Manager admin center > Tenant administration > Microsoft Tunnel Gateway > select the Sites tab > Create.

  2. On the Create a site pane, specify the following properties:

    • Name: Enter a name for this Site.

    • Description (optional)

    • Public IP address or FQDN: Specify a public IP address or FQDN, which is the connection point for devices that use the tunnel. This IP address or FQDN can identify an individual server or a load-balancing server. The IP address or FQDN must be resolvable in public DNS and the resolved IP address must be publicly routable.

    • Server configuration: Use the drop-down to select a server configuration to associate with this Site.

    • URL for internal network access check: Specify an HTTP or HTTPS URL for a location on your internal network. Every five minutes, each server that's assigned to this site will attempt to access the URL to confirm that it can access your internal network. Servers report the status of this check as Internal network accessibility on the servers Health check tab.

    • Automatically upgrade servers at this site: If Yes, servers upgrade automatically when an upgrade is available. If No, upgrade is manual and an administrator must approve an upgrade before it can start.

      For more information, see Upgrade Microsoft Tunnel.

    • Limit server upgrades to maintenance window: If Yes, server upgrades for this site can only start between the start time and end time specified. There must be at least an hour between the start time and end time. When set to No, there's no maintenance window and upgrades start as soon as possible depending on how Automatically upgrade servers at this site is configured.

      When set to Yes, configure the following options:

      • Time zone – The time zone you select determines when the maintenance window starts and ends on all servers in the site, regardless of the time zone of individual servers.
      • Start time – Specify the earliest time that the upgrade cycle can start, based on the time zone you selected.
      • End time - Specify the latest time that upgrade cycle can start, based on the time zone you selected. Upgrade cycles that start before this time will continue to run and can complete after this time.

      For more information, see Upgrade Microsoft Tunnel.

      (Video) S02E23 - Getting started with Microsoft Tunnel VPN for iOS and Android with Jeff Gilbert - (I.T)

  3. Select Create to save the Site.

Install Microsoft Tunnel Gateway

Before installing Microsoft Tunnel Gateway on a Linux server, configure your tenant with at least one Server configuration, and then create a Site. Later, you’ll specify the Site that a server joins when you install the tunnel on that server.

Use the script to install Microsoft Tunnel

  1. Download the Microsoft Tunnel installation script by using one of the following methods:

  2. To start the server installation, run the script as root. For example, you might use the following command line: sudo chmod +x ./mstunnel-setup. The script always installs the most recent version of Microsoft Tunnel.

    Important

    For the U.S. government cloud, the command line must reference the government cloud environment. To do so, run the following comands to add intune_env=FXP to the command line:

    1. Run sudo chmod +x ./mstunnel-setup
    2. Run sudo intune_env=FXP ./mstunnel-setup

    Tip

    If you stop the installation and script, you can restart it by running the command line again. Installation continues from where you left off.

    When you start the script, it downloads container images from Microsoft Tunnel Gateway container images from the Intune service, and creates necessary folders and files on the server.

    During setup, the script will prompt you to complete several admin tasks.

  3. When prompted by the script, accept the license agreement (EULA).

  4. Review and configure variables in the following files to support your environment.

    • Environment file: /etc/mstunnel/env.sh. For more information on these variables, see Environment variables in the reference for Microsoft Tunnel article.
  5. When prompted, copy the full chain of your Transport Layer Security (TLS) certificate file to the Linux server. The script displays the correct location to use on the Linux server.

    The TLS certificate secures the connection between the devices that use the tunnel and the Tunnel Gateway endpoint. The certificate must have the IPI address or FQDN of the Tunnel Gateway server in its SAN.

    The private key will remain available on the machine where you create the certificate signing request for the TLS certificate. This file must be exported with a name of site.key.

    Install the TLS certificate and private key. Use the following guidance that matches your file format:

    • PFX:

      • The certificate file name must be site.pfx. Copy the certificate file to /etc/mstunnel/private/site.pfx.
    • PEM:

      • The full chain (root, intermediate, end-entity) must be in a single file named site.crt. If your using a certificate issued by a public provider like Digicert, you have the option of downloading the complete chain as a single .pem file.

      • The certificate file name must be *site.crt. Copy the full chain certificate into /etc/mstunnel/certs/site.crt. For example: cp [full path to cert] /etc/mstunnel/certs/site.crt

        Alternatively, create a link to the full chain cert in /etc/mstunnel/certs/site.crt. For example: ln -s [full path to cert] /etc/mstunnel/certs/site.crt

      • Copy the private key file into /etc/mstunnel/private/site.key. For example: cp [full path to key] /etc/mstunnel/private/site.key

        Alternatively, create a link to the private key file in /etc/mstunnel/private/site.key. For example: ln -s [full path to key file] /etc/mstunnel/private/site.key This key shouldn't be encrypted with a password. The private key file name must be site.key.

  6. After setup installs the certificate and creates the Tunnel Gateway services, you’re prompted to sign in and authenticate with Intune. The user account must have either the Intune Administrator or Global Administrator roles assigned. The account you use to complete the authentication must have an Intune license. The credentials of this account aren't saved and are only used for initial sign-in to Azure Active Directory. After successful authentication, Azure app IDs/secret keys are used for authentication between the Tunnel Gateway and Azure Active Directory.

    (Video) Microsoft Endpoint Manager Intune Microsoft Tunnel

    This authentication registers Tunnel Gateway with Microsoft Endpoint Manager and your Intune tenant.

    1. Open a web browser to https://Microsoft.com/devicelogin and enter the device code that’s provided by the installation script, and then sign in with your Intune admin credentials.

    2. After Microsoft Tunnel Gateway registers with Intune, the script gets information about your Sites and Server configurations from Intune. The script then prompts you to enter the GUID of the tunnel Site you want this server to join. The script presents you with a list of your available sites.

    3. After you select a Site, setup pulls the Server configuration for that Site from Intune, and applies it to your new server to complete the Microsoft Tunnel installation.

  7. After the installation script finishes, you can navigate in Microsoft Endpoint Manager admin center to the Microsoft Tunnel Gateway tab to view high-level status for the tunnel. You can also open the Health status tab to confirm that the server is online.

  8. If you’re using RHEL 8.4 or later, be sure to restart the Tunnel Gateway server by entering mst-cli server restart before you attempt to connect clients to it.

Deploy the Microsoft Tunnel client app

To use the Microsoft Tunnel, devices need access to a Microsoft Tunnel client app. You can deploy the tunnel client app to devices by assigning it to users. The following apps are available:

  • Android:

    • Microsoft Defender for Endpoint - Download Microsoft Defender for Endpoint for use as the Microsoft Tunnel client app from the Google Play store. See Add Android store apps to Microsoft Intune.

      When you use Microsoft Defender for Endpoint as your tunnel client application and as a mobile threat defense (MTD) application, see Use Microsoft Defender for Endpoint for MTD and as the Microsoft Tunnel client app for important configuration guidance.

  • iOS/iPadOS:

    Important

    Plan for change. On April 29, 2022 both the Microsoft Tunnel connection type and Microsoft Defender for Endpoint as the tunnel client app became generally available. With this general availability, the use of the Microsoft Tunnel (standalone client)(preview) connection type and the standalone tunnel client app are deprecated and soon will drop from support.

    • On July 29, 2022, the standalone tunnel client app will no longer be available for download. Only the generally available version of Microsoft Defender for Endpoint will be available as the tunnel client app.
    • On August 1, 2022, the Microsoft Tunnel (standalone client) (preview) connection type will cease to connect to Microsoft Tunnel.

    To avoid a disruption in service for Microsoft Tunnel, plan to migrate your use of the deprecated tunnel client app and connection type to those that are now generally available.

For more information on deploying apps with Intune, see Add apps to Microsoft Intune.

Create a VPN profile

After the Microsoft Tunnel installs and devices install the Microsoft Tunnel client app, you can deploy VPN profiles to direct devices to use the tunnel. To do so, you’ll create VPN profiles with one of the following connection types:

  • Android:

    • Microsoft Tunnel - Use this connection type with Defender for Endpoint as the tunnel client app.

      Note

      Prior to support for using Microsoft Defender for Endpoint as the tunnel client app, a standalone tunnel client app was available in preview and used a connection type of Microsoft Tunnel (standalone client). As of June 14 2021, both the standalone tunnel app and standalone client connection type are deprecated and drop from support after October 26, 2021.

    The Android platform supports routing of traffic through a per-app VPN and split tunneling rules independently, or at the same time.

    Note

    Prior to support for using Microsoft Defender for Endpoint as the tunnel client app, a standalone tunnel client app was available in preview and used a connection type of Microsoft Tunnel (standalone client). As of June 14 2021, both the standalone tunnel app and standalone client connection type are deprecated and drop from support after January 31, 2022.

  • iOS/iPadOS:

    • Microsoft Tunnel – Use this connection type with Microsoft Defender for Endpoint as the tunnel client app.

      (Video) Providing access to on-premises resources for mobile devices using Microsoft Tunnel

    • Microsoft Tunnel (standalone client) (preview) – Use this connection type when you use the standalone Microsoft Tunnel client app. This connection type doesn’t support Microsoft Defender for Endpoint as the client Tunnel app.

      Important

      Plan for change. On April 29, 2022 both the Microsoft Tunnel connection type and Microsoft Defender for Endpoint as the tunnel client app became generally available. With this general availability, the use of the Microsoft Tunnel (standalone client)(preview) connection type and the standalone tunnel client app are deprecated and soon will drop from support.

      • On July 29, 2022, the standalone tunnel client app will no longer be available for download. Only the generally available version of Microsoft Defender for Endpoint will be available as the tunnel client app.
      • On August 1, 2022, the Microsoft Tunnel (standalone client) (preview) connection type will cease to connect to Microsoft Tunnel.

      To avoid a disruption in service for Microsoft Tunnel, plan to migrate your use of the deprecated tunnel client app and connection type to those that are now generally available.

    The iOS platform supports routing traffic by either a per-app VPN or by split tunneling rules, but not both simultaneously. If you enable a per-app VPN for iOS, your split tunneling rules are ignored.

Android

  1. Sign in to Microsoft Endpoint Manager admin center > Devices > Configuration profiles > Create profile.

  2. For Platform, select Android Enterprise. For Profile select VPN for either Corporate-Owned Work Profile or Personally-Owned Work Profile, and then select Create.

    Note

    Android Enterprise dedicated devices aren't supported by the Microsoft Tunnel.

  3. On the Basics tab, enter a Name and Description (optional) and select Next.

  4. For Connection type select Microsoft Tunnel, and then configure the following details:

    • Base VPN:

      • For Connection name, specify a name that will display to users.
      • For Microsoft Tunnel Site, select the Tunnel site that this VPN profile will use.
    • Per-app VPN:

      • Apps that are assigned in the per-app VPN profile send app traffic to the tunnel.
      • On Android, launching an app won't launch the per-app VPN. However, when the VPN has Always-on VPN set to Enable, the VPN will already be connected and app traffic will use the active VPN. If the VPN isn't set to be Always-on, the user must manually start the VPN before it can be used.
      • If you're using the Defender for Endpoint app to connect to Tunnel, have web protection enabled, and are using per-app VPN, web protection will only apply to the apps in the per-app VPN list. On devices with a work profile, in this scenario we recommend adding all web browsers in the work profile to the per-app VPN list to ensure all work profile web traffic is protected.
      • To enable a per-app VPN, select Add and then browse to the custom or public apps you’ve imported to Intune.
    • Always-on VPN:

      • For Always-on VPN, select Enable to set the VPN client to automatically connect and reconnect to the VPN. Always-on VPN connections stay connected. If Per-app VPN is set to Enable, only the traffic from apps you select go through the tunnel.
    • Proxy:

      • Configure proxy server details for your environment.

        Note

        Proxy server configurations are not supported with versions of Android prior to version 10. For more information, see VpnService.Builder in that Android developer documentation.

    For more information about VPN settings, see Android Enterprise device settings to configure VPN

    Important

    For Android Enterprise devices that use Microsoft Defender for Endpoint as a Microsoft Tunnel client application and as a MTD app, you must use custom settings to configure Microsoft Defender for Endpoint instead of using a separate app configuration profile. If you do not intend to use any Defender for Endpoint functionality, including web protection, use custom settings in the VPN profile and set the defendertoggle setting to 0.

  5. On the Assignments tab, configure groups that will receive this profile.

  6. On the Review + create tab, review the configuration, and then select Create to save it.

iOS

  1. Sign in to Microsoft Endpoint Manager admin center > Devices > Device Configuration > Create profile.

  2. For Platform, select iOS/iPadOS, and then for Profile select VPN, and then Create.

  3. On the Basics tab, enter a Name and Description (optional) and select Next.

  4. For Connection type, select Microsoft Tunnel(preview) and then configure the following items:

    • Base VPN:

      (Video) S01E33 - Configuring VPN Profiles with Microsoft Intune - (I.T)

      • For Connection name, specify a name that will display to users.
      • For Microsoft Tunnel Site, select the tunnel Site that this VPN profile will use.
    • Per-app VPN:

      • To enable a per-app VPN, select Enable. Extra configuration steps are required for iOS per-app VPNs. When the per-app VPN is configured, your split tunneling rules are ignored by iOS.

        For more information, see Per-App VPN for iOS/iPadOS.

    • On-Demand VPN Rules:
      Define on-demand rules that allow use of the VPN when conditions are met for specific FQDNs or IP addresses.

      For more information, see Automatic VPN settings

    • Proxy:

      • Configure proxy server details for your environment.

Use custom settings for Microsoft Defender for Endpoint

Intune supports Microsoft Defender for Endpoint as both an MTD app and as the Microsoft Tunnel client application on Android Enterprise devices. If you use Defender for Endpoint for both the Microsoft Tunnel client application and as an MTD app, you can use custom settings in your VPN profile for Microsoft Tunnel to simplify your configurations. Use of custom settings in the VPN profile replaces the need to use a separate app configuration profile.

For devices enrolled as Android Enterprise personally-owned work profile that use Defender for Endpoint for both purposes, you must use custom settings instead of an app configuration profile. On these devices, the app configuration profile for Defender for Endpoint conflicts with Microsoft Tunnel and can prevent the device from connecting to Microsoft Tunnel.

If you use Microsoft Defender for Endpoint for Microsoft Tunnel but not MTD , then you continue to use the app tunnel configuration profile to configure Microsoft Defender for Endpoint as a Tunnel Client.

Add app configuration support for Microsoft Defender for Endpoint to a VPN profile for Microsoft Tunnel

Use the following information to configure the custom settings in a VPN profile to configure Microsoft Defender for Endpoint in place of a separate app configuration profile. Available settings vary by platform.

For Android Enterprise devices:

Configuration keyValue typeConfiguration valueDescription
vpnIntegerOptions:
1 - Enable (default)
0 - Disable
Set to Enable to allow the Microsoft Defender for Endpoint anti-phishing capability to use a local VPN.
antiphishingIntegerOptions:
1 - Enable (default)
0 - Disable
Set to Enable to turn on Microsoft Defender for Endpoint anti-phishing. When disabled, the anti-phishing capability is turned off.
defendertoggleIntegerOptions:
1 - Enable (default)
0 - Disable
Set to Enable to use Microsoft Defender for Endpoint. When disabled, no Microsoft Defender for Endpoint functionality is available.

Install and configure Microsoft Tunnel VPN solution for Microsoft Intune (2)

For iOS/iPad devices:

Configuration keyValuesDescription
TunnelOnlyTrue – All Defender for Endpoint functionality is disabled. This setting should be used if you're using the app only for Tunnel capabilities.

False (default) - Defender for Endpoint functionality is enabled.

Determines whether the Defender app is limited to only Microsoft Tunnel, or if the app also supports the full set of Defender for Endpoint capabilities.
WebProtectionTrue (default) – Web Protection is enabled, and users will see the web protection tab in the Defender for Endpoint app.

False – Web Protection is disabled. If a Tunnel VPN profile is deployed, users will only see the Dashboard and Tunnel tabs in the Defender for Endpoint app.

Determines whether Defender for Endpoint Web Protection (anti-phishing functionality) is enabled for the app. By default, this functionality is on.
AutoOnboardTrue – If Web Protection is enabled, the Defender for Endpoint app is automatically granted permissions for adding VPN connections and the user isn’t prompted to allow this.

False (default) – If Web Protection is enabled, the user is prompted to allow the Defender for Endpoint app to add VPN configurations.

Determines whether Defender for Endpoint Web Protection is enabled without prompting the user to add a VPN connection (because a local VPN is needed for Web Protection functionality). This setting only applies if WebProtection is set to True.

Configure TunnelOnly mode to comply with the European Union Data Boundary

By end of calendar year 2022, all personal data, including customer Content (CC), EUII, EUPI and Support Data must be stored and processed in the European Union (EU) for EU tenants.

The Microsoft Tunnel VPN feature in Defender for Endpoint is European Union Data Boundary (EUDB) compliant. However, the Defender for Endpoint threat protection components related to logging are not yet EUDB compliant. EUBD compliance will become available in a future release.

In the meantime, Microsoft Tunnel customers with EU tenants can enable TunnelOnly mode in the Defender for Endpoint Client app. To configure this, use the following steps:

  1. Follow the steps found in Install and configure Microsoft Tunnel VPN solution for Microsoft Intune | Microsoft Learn to create an app configuration policy which disables Defender for Endpoint functionality.

  2. Create a key called TunnelOnly and set the value to True.

By configuring TunnelOnly mode, all Defender for Endpoint functionality is disabled while Tunnel functionality remains available for use in the app.

For more information about the EU Data Boundary, see EU Data Boundary for the Microsoft Cloud | Frequently Asked Questions on the Microsoft security and compliance blog.

Upgrade Microsoft Tunnel

Intune periodically releases updates to the Microsoft Tunnel server. To stay in support, tunnel servers must run the most recent release, or at most be one version behind.

By default, after a new upgrade is available Intune automatically starts the upgrade of tunnel servers as soon as possible, at each of your tunnel sites. To help you manage upgrades, you can configure options that manage the upgrade process:

  • You can allow automatic upgrade of servers at a site, or require admin approval before upgrades being.
  • You can configure a maintenance window, which limits when upgrades at a site can start.

For more information about upgrades for Microsoft Tunnel, including how to view tunnel status and configure upgrade options, see Upgrade Microsoft Tunnel.

Update the TLS certificate on the Linux server

You can use the ./mst-cli command-line tool to update the TLS certificate on the server:

PFX:

  1. Copy the certificate file to /etc/mstunnel/private/site.pfx
  2. Run: mst-cli import_cert
  3. Run: mst-cli server restart

PEM:

  1. Copy the new certificate to /etc/mstunnel/certs/site.crt
  2. Copy the private key to /etc/mstunnel/private/site.key
  3. Run: mst-cli import_cert
  4. Run: mst-cli server restart

For more information about mst-cli, see Reference for Microsoft Tunnel.

Uninstall the Microsoft Tunnel

To uninstall the product, run ./mst-cli uninstall from the Linux server as root.

After the product is uninstalled, delete the corresponding server record in the Microsoft Endpoint Manager admin center under Tenant administration > Microsoft Tunnel Gateway > Servers.

Next steps

Use Conditional Access with the Microsoft Tunnel
Monitor Microsoft Tunnel

FAQs

How do I install Microsoft tunnel? ›

Go to https://aka.ms/microsofttunneldownload to download the file mstunnel-setup. Sign in to Microsoft Endpoint Manager admin center > Tenant administration > Microsoft Tunnel Gateway, select the Servers tab, select Create to open the Create a server pane, and then select Download script.

What is Microsoft TLS VPN solution? ›

Microsoft Tunnel is a VPN gateway solution for Microsoft Intune that runs in a container on Linux and allows access to on-premises resources from iOS/iPadOS and Android Enterprise devices using modern authentication and Conditional Access.

Is Microsoft Intune a VPN? ›

Microsoft Intune includes many VPN settings that can be deployed to your iOS/iPadOS devices. These settings are used to create and configure VPN connections to your organization's network. This article describes these settings. Some settings are only available for some VPN clients, such as Citrix, Zscaler, and more.

What are 3 types of VPN tunnels? ›

We'll look at three of the most common: IPsec tunnels, Dynamic multi point VPNs, and MPLS-based L3VPNs.
  • IPsec Tunnels. In principle, a network-based VPN tunnel is no different from a client-based IPsec tunnel. ...
  • Dynamic Multi point VPN (DMVPN) ...
  • MPLS-based L3VPN.
Feb 16, 2022

How do I enable tunnel VPN? ›

SSL certificate authentication
  1. In the administration interface, go to Interfaces.
  2. Click Add > VPN Tunnel.
  3. Type a name of the new tunnel.
  4. Set the tunnel as active and type the hostname of the remote endpoint. At least one endpoint must be set as active. ...
  5. Select Type: IPsec.
  6. Select Remote certificate:

How does VPN tunnel work? ›

A VPN tunnel connects your smartphone, laptop, computer, or tablet to another network in which your IP address is hidden and all the data you generate while surfing the web is encrypted.

How do I setup a Microsoft VPN server? ›

In Settings, select Network & internet > VPN. Next to the VPN connection you want to use, select Connect. If you're prompted, enter your username and password or other sign-in info.

Can Intune track location? ›

No device location information is sent to Intune until you turn on this action. When you use the locate device action, the latitude and longitude coordinates of the device can be retrieved by using the Graph API. The data is stored for 24 hours, then removed. You can't manually remove the location data.

What is the purpose of Microsoft Intune? ›

Microsoft Intune is a cloud-based endpoint management solution. It manages user access and simplifies app and device management across your many devices, including mobile devices, desktop computers, and virtual endpoints. You can protect access and data on organization-owned and users personal devices.

What is VPN in Intune? ›

Virtual private networks (VPNs) give users secure remote access to your organization network. Devices use a VPN connection profile to start a connection with the VPN server. VPN profiles in Microsoft Intune assign VPN settings to users and devices in your organization.

What is the tunnel app on my phone? ›

What is the VMware Tunnel App? The VMware Tunnel App is a mobile application that an end user can download through Apple's App Store or Android's Play Store. It provides a safe method for organizations to allow internal applications, and public applications, to access corporate resources.

Which two types of tunnels are available for always on VPN connections in Windows 10? ›

Always On VPN connections include two types of tunnels:
  • Device tunnel connects to specified VPN servers before users log on to the device. Pre-login connectivity scenarios and device management purposes use device tunnel.
  • User tunnel connects only after a user logs on to the device.
Oct 19, 2022

How do I add a VPN tunnel to Azure? ›

Create Site-to-Site VPN
  1. 1) Log in to azure portal.
  2. 2) Go to More Services > Virtual network gateways.
  3. 3) Then click on the virtual network gateway you created and, under the settings tab, click on connection.
  4. 4) Then click on add.
  5. 5) In the wizard fill the relevant information and click ok.
Dec 11, 2016

What is the difference between VPN and VPN tunnel? ›

What is a VPN tunnel? A VPN is a secure, encrypted connection over a publicly shared network. Tunneling is the process by which VPN packets reach their intended destination, which is typically a private network. Many VPNs use the IPsec protocol suite.

What is an advantage of VPN tunnel mode? ›

Tunnel mode, which is used in most VPNs, creates virtual tunnels between two subnets. This mode encrypts the payload and the IP header. The principal advantage of IPSec is that it offers confidentiality and authentication at the packet level between hosts and networks.

What are the four 4 critical functions of VPN discuss its functions? ›

Four Critical Functions

Authentication – validates that the data was sent from the sender. Access control – limiting unauthorized users from accessing the network. Confidentiality – preventing the data to be read or copied as the data is being transported.

What are the 2 types of tunneling in VPNs? ›

The most common VPN tunneling protocols include PPTP, L2TP/IPsec, OpenVPN and SSTP.
...
What are the different types of VPN tunnel protocols?
  • PPTP. You can thank Microsoft for PPTP (Point-to-Point Tunneling Protocol). ...
  • L2TP/IPsec. ...
  • OpenVPN.

How to setup IPsec tunnel VPN? ›

Follow these steps:
  1. Go to Settings > Network > VPN. ...
  2. Select Layer 2 Tunneling Protocol (L2TP).
  3. Enter anything you like in the Name field.
  4. Enter Your VPN Server IP for the Gateway.
  5. Enter Your VPN Username for the User name.
  6. Right-click the ? in the Password field and select Store the password only for this user.
Aug 25, 2021

How do I check VPN tunnels? ›

Resolution
  1. Sign in to the Amazon VPC console.
  2. In the navigation pane, under Site-to-Site VPN Connections, choose Site-to-Site VPN Connections.
  3. Select your VPN connection.
  4. Choose the Tunnel Details view.
  5. Review the Status of your VPN tunnel.
  6. If the tunnel status is UP, then choose the Static Routes view.
Jun 17, 2022

Which type of VPN is best to use? ›

Many VPN experts recommend OpenVPN as the most secure protocol. It uses 256-bit encryption as a default but also offers other ciphers such as 3DES (triple data encryption standard), Blowfish, CAST-128, and AES (Advanced Encryption Standard).

What is a VPN and why is it needed? ›

VPN stands for "Virtual Private Network" and describes the opportunity to establish a protected network connection when using public networks. VPNs encrypt your internet traffic and disguise your online identity. This makes it more difficult for third parties to track your activities online and steal data.

What are the disadvantages of using tunneling VPN? ›

  • A VPN Will Not Make You Completely Anonymous.
  • Your Privacy Depends On Your VPN Service.
  • It's Illegal to Use a VPN in Some Countries.
  • Good VPN Services Cost Money.
  • Using a VPN Slows Down Your Connection Speeds.
  • VPNs Increase Data Consumption.
  • Some Online Services Ban VPN Users.
Jan 9, 2023

Does VPN change your IP? ›

A VPN replaces your actual IP address to make it look like you've connected to the internet from a different location: the physical location of the VPN server, rather than your real location. This is just one reason why so many people use VPNs.

How to configure VPN step by step? ›

Set Up a VPN on an Android Device

Go to “Settings” and from there click “Network & Internet” then “Advanced” and, finally, “VPN.” Click “Add VPN.” Fill out your VPN's “Name” and “Server” and hit save. Click on your newly added VPN profile and fill out the “Account” and “Password” fields then click “Connect.”

Why is my VPN not connecting to server? ›

If your VPN software is not working properly, you can do several things: check your network settings, change your server, make sure the right ports are opened, disable the firewall, and reinstall your VPN software. If none of the below methods are working, it's time to contact your VPN provider.

How do I access my VPN server remotely? ›

How To Set Up VPN For Remote Access. It's simple. Just install Access Server on the network, and then connect your device with our Connect client. Access Server will accept incoming connections from internet only if that device and user has the correct access code and certifications necessary.

Can Microsoft Intune spy me? ›

Your organization can't see your personal information when you enroll a device in Microsoft Intune. Enrolling your device makes certain information, such as device model and serial number, visible to IT administrators and support people with administrator access.

Can Intune see my browsing history? ›

Intune doesn't collect nor allow an Admin to see the following data: An end users' calling or web browsing history. Personal email. Text messages.

Can Intune block websites? ›

Configuring Allow and Block URL's using Intune app configuration policies. Using app configuration policies, you can allow or block URLs where you find relevant. This can be done in the same way we followed when adding a bookmark or homepage.

What does Intune have access to? ›

Intune allows you to see all devices enrolled and able to access company resources, giving you an inventory. Configure apps on user devices. For example, add and assign apps to users, configure app settings and automatically update apps on relevant devices. Track usage analytics for business use.

Is Microsoft Intune required? ›

Required unless your devices are "userless" kiosk devices, for example. Groups are used to assign apps, settings, and other resources. Assign licenses - Give users permission to use Intune. Each user or userless device requires an Intune license to access the service.

What is Microsoft Intune called now? ›

The name Microsoft Endpoint Manager will no longer be used. Going forward, we'll refer to cloud management as Microsoft Intune and on-premises management as Microsoft Configuration Manager.

How do I set up SSL tunnel? ›

How to Create an SSL Tunnel
  1. Create a SSL tunnel. Log into the SSL VPN web interface. ...
  2. (Optional) Configure advanced tunnel settings. You can configure additional settings such as auto launch, multiple port ranges or tunnel type by editing the SSL tunnel configuration: ...
  3. Test the SSL tunnel.
Jun 6, 2016

How do I create a tunnel in Windows 10? ›

Access a server using an SSH tunnel on Windows
  1. In the “Connection -> SSH -> Tunnels” section, create a secure tunnel by forwarding a port (the “destination port”) on the remote server to a port (the “source port”) on the local host (127.0. ...
  2. Click the “Add” button to add the secure tunnel configuration to the session.
Sep 28, 2020

How do I set up IPsec tunnel? ›

Follow these steps:
  1. Go to Settings > Network > VPN. ...
  2. Select Layer 2 Tunneling Protocol (L2TP).
  3. Enter anything you like in the Name field.
  4. Enter Your VPN Server IP for the Gateway.
  5. Enter Your VPN Username for the User name.
  6. Right-click the ? in the Password field and select Store the password only for this user.
Aug 25, 2021

How do I download open tunnel iOS? ›

OpenVPN for iOS
  1. Step 1 – Download OpenVPN Connect from the AppStore. The app can be downloaded at: https://apps.apple.com/us/app/openvpn-connect/id590379981. ...
  2. Step 2 – Determine Tunnel Type. We offer two different tunnel options: full tunnel and split tunnel. ...
  3. Step 3 – Import Profile. ...
  4. Step 4 – Connect to the VPN.
Sep 28, 2022

Videos

1. Windows 10 Always On VPN Device Tunnel Deployment with Microsoft Intune
(Richard M. Hicks)
2. Nomasis Webinar Microsoft Tunnel Gateway
(Nomasis AG)
3. Windows 10 Always On VPN User Tunnel Deployment with Microsoft Intune
(Richard M. Hicks)
4. Always On VPN Deployment Guide
(divv)
5. The MEM Xperience Podcast Clips - Microsoft Tunnel Demos
(The MEM Xperience Podcast)
6. Windows Autopilot Hybrid Azure AD Join: Create Intune Win32 App Cisco AnyConnect VPN + SBL
(Mr B SOE way)
Top Articles
Latest Posts
Article information

Author: Wyatt Volkman LLD

Last Updated: 02/10/2023

Views: 5910

Rating: 4.6 / 5 (66 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Wyatt Volkman LLD

Birthday: 1992-02-16

Address: Suite 851 78549 Lubowitz Well, Wardside, TX 98080-8615

Phone: +67618977178100

Job: Manufacturing Director

Hobby: Running, Mountaineering, Inline skating, Writing, Baton twirling, Computer programming, Stone skipping

Introduction: My name is Wyatt Volkman LLD, I am a handsome, rich, comfortable, lively, zealous, graceful, gifted person who loves writing and wants to share my knowledge and understanding with you.